(Fig1)
Thank you for purchasing this HiB product.
Please read through these instructions carefully and refer back to them during installation to ensure that
your product is fitted safely and that it retains its high quality finish.
Please retain this leaflet for future reference.
Before drilling, ensure there are no hidden cables or pipes in the wall.
Parity & Laser Recessed Cabinets
FI
#02 002
R
150907
Ver No.
1.0 Jan 2016
Please Note
This product can be fitted into a partition wall, or wall hung. Before installing
ensure you take note of measurements of recessed area or mounting points (See
fig. A).
This product must be installed with a minimum distance of 150mm between
the infra-red sensor switch and any adjacent wall or object to ensure correct
operation of the sensor.
You may need to remove the door / doors to make it easier to fit. This can be
done by unclipping the hinges. (There is a release catch at the back of the hinge).
DO NOT FIT SHELVES AT THIS STAGE.
Laser
Art No.
44300
Parity
Art No.
44200