1.
Break the security sealing on dump valve 1.
2.
Press the dump valve button and turn 90 degrees
until it is blocked.
3.
Operate the crane to parking position using the
levers on the main control valve.
7.5. Transport warning [option]
WARNING
If you switch off the safety system when stabiliser
extensions/stabiliser legs are not locked in the transport
position, and/or if the first boom angle exceeds a certain
specified angle, the indicator LEDs on the UI for both the
cylinders and the hoist will flash red for a while.
The vehicle must not be moved.
• A warning, visible and audible from the driving position
for transport, indicates when the crane height exceeds a
predetermined maximum and when the stabiliser
extensions/stabiliser legs are not locked in the transport
position.
• The audible warning can be silenced by an
acknowledgement button [option] or by a signal
indicating that the parking brake of the vehicle is
engaged.
The vehicle must not be moved
1. Switch the system on, put the crane into the transport position.
2. Switch off the system. The vehicle may be moved.
DANGER
After use always put the crane into the transport position! When you have to park
the boom on the load space, or over the load, secure the boom and the lifting
accessories to prevent any unintentional movement of the crane and the lifting
accessories.
Ending crane operation
HIAB 410K PRO
55