96
Select: Press soft key „Select‟ to select the current
working file of the instrument. You may select your file
repeatedly and the selection can be checked in the „Select file‟
dialogue box.
MEA= Measurement File, working for storing data
COO= Coordinate File, being used when transferring
coordinate
COD= Code File, being used when transferring code
LS= LH =Defined line File, working for staking out
roadway
The files relates to the related files. e.g .MEA files are
specifically for measurement and .COO files are specifically
for coordinates. However, the selected files are not saved to
system files when shutting down. You may have to save the file
names under „Select files‟ dialogue box.
New: establish a new file in the instrument. Press soft key
„New‟ and the instrument will ask you to enter the file name.
The file type is the same as the file selected (under which
you press „New‟). If the new file exists in the instrument, then
the system will not establish a new file. Mention that the