52
After entering or call the coordinate of the BBS, a dialog
box appears that„Aim the BBS‟ ,and you can press „Enter‟ to
orient, otherwise, press „ESC‟ to exit.
After pressing „ENT‟, the coordinate of BBS is displayed
on the screen .You can press „Check‟ to measure the BBS and
check the result.
After the measurement, the instrument displays the
difference between the theoretical distance and the measured
distance. Press the soft key F3 „Coord.‟ to display the coordinate
of the current BBS. You can compare it with the entered value.
Press„Save‟ to save the measured record.
9.1.4 Set azimuth
Setting the azimuth angle as same as to set up BBS,
which
is also to relate earth coordinate with the instrument coordinate.
However, setting up azimuth angle is impossible when the
azimuth angle of BBS is unknown. Please aim at the BBS and
input the BBS azimuth angle first.
You can choose one of them ,which are „Orientation (BBS)‟
and „Orientation (SetA)‟,because they both work for the
orientation of BBS.
9.1.5 Surveying
If the instrument has be set „survey first‟, it starts the
coordinate measurement after pressing „EDM‟. As soon as the
measurement is done successfully, the soft key „record‟ appears.
You can press „Record‟ to enter the page of „information‟ to edit
the name and code and save the result.
T.H: 0.000m
Pt.name:
N: S m
E:
Z:
Offset
Save
EDM
HR:
dHR:
HD:
dHD:
dZ:
Meas
Mode
Coord.
Save