40
you to remember the point names and to speed up the process of
searching for points.
STA
: The operation of entering “STA” is the same as that of
setting 'BBS‟. you must first operate „STA‟ before setting „BBS‟
On the Third Page
Offset
:
Press soft key„F1‟ to operate offset function. Offset function
is designed to obtain the coordinate of measured point when
prism cannot be place at the measured point or when distance
measuring cannot be done. Offset function is divided into Angle
Offset, Single/ Double- distance Offset, Plane Offset and Column
Offset. See reference in 8. Offset Mode.
Stake
:
Press soft key „F2‟ to operate staking-out function. With this
function, you may put designed data onto earth points. See
reference in 9.2 Staking out
Set A
:
Press soft key „F3‟ to enter the current azimuth angle of
„BBS‟. Mention that you must aim at the BBS to set up the angle.