18
2.3.4 Explanation of Saving of data
If you have never selected the measurement file and your
first time to use the [Save] soft key , then a dialogue box of
„Select file‟ would appear to the screen. Mention that this is a
good chance for you to select all files that the instrument may use.
When finishing single measurement or repeated
measurement under each mode, a dialogue box „information‟
asking you to save the measured point, you may rename and code
the points or set target height. The key „ENT‟ will save the
coordinates into measurement files, and the key [
★
] save the
coordinates in the measurement file and coordinate file at the
same time (according to the mention of the display).
If you choose not to edit points, the points would be saved
with the present name, elevation and code .After saving, the name
of the point is added by one.
2.4 Star(
★
) Key Mode
Under the distance measurement interface, pressing the key
[
★
](star key) can lead to a page as shown below.
Settings from the star key(
★
) are as followed:
Adjust the contrast by pressing „▲‟ and „▼‟.
Adjust the he background light of the screen with „
◄
‟ and
„
►
‟.
Turn on or off the background light of the screen by pressing
Key „F1‟.
Turn on or off the display of compensation by pressing „F2‟.