Hi-Target ZTS-320 Series Manual Download Page 15

Page: 15 / 97

Comp.

Display the inclination (tilt) of the vertical axis

Light

Turn on or off the backlight and the illuminating
brightness of reticle (at the same time).

Para.

Set the atmospheric parameters, prism constant and
signals.

2.3 Functional keys under the basic measuring mode

2.3.1 Angle Mode(including 2 menu pages)

Page

Soft key

Reference

Function

Save

Record the measured angle in
the selected file.

Set0

Set the horizontal angle as 0

SetA

Set your desired horizontal
angle by inputting ,but the
angle should not be greater
than 360°

P1/2

Display the second page of the
soft key functions

Hold

Lock the horizontal angle
readings.

L/R

Switch between HR
(horizontal right/ clockwise)
and HL (horizontal left/
anticlockwise) mode

Vertical Angle Mode (altitude

angle, Zenith, Horizontal „0‟,
slope)

P2/2

Display the first page of the
soft key functions.

Summary of Contents for ZTS-320 Series


































































































Search results

Summary of Contents for ZTS-320 Series

Reviews:

Hi-Target ZTS-320 Series, Manual, Page: 15 / 97

Search results

Summary of Contents for ZTS-320 Series

Reviews: