Thank you for purchasing our product.
Please read this User
’
s Manual before
using the product
.
Change without Notice
White Light LED + IR + Motion detected
3D Free Angle Camera
Please read before using
1.
Please read the service manual in details before using.
2.
Don't try to disassemble the chassis or the part easily , in case
that touch the power by mistake , is shocked by electricity the
danger or caused inside parts to be damaged ,
3.
This product is a
IP- 67
waterproof camera
。
4.
Do not attempt to service this unit yourself unless you are
authorized to do so. Opening cover may exposure you to
dangerous voltage or other hazards. Refer all servicing to
qualified personnel only.
5.
When being regular, please lock the parts firmly first to prevent
the machine damage.
6.
Please connect correctly in accordance with the regulation,
prevent the machine from using , or striking improperly.
7.
Please don't use any organic solution or the corrosively sanitizer
to insert and wipe away the chassis outside . While inserting and
wiping away, please turn off the power, and use the clean cloth is
stained with letting a small amount of branch water, insert and
wipe away appearance.
8.
Please don't use the camera under the following abominable
environments: Temperature is lower than -10 degrees
Centigrade, or is higher than +50 degrees Centigrade.
3
SAFETY PRECAUTIONS
FUNCTION
CONTENT TABLE
CONTENT TABLE
…………………………………………
..
………………
. 2
SAFETY PRECAUTIONS
………………………………………
................. 3
FUNCTION
……………………………………………………………………
4
SENSOR
……………………………………………
..
……………
. 4
LENS
………………………………………
..
………………………
4
IR LENS
………………………………
..
…………………………
... 4
Power and Video Output Jack
……………………………………
5
INSTALL STEP
………
..
……………………………………………………
.. 7
SPECIFICATIONS
……
.
……………………………………………………
.. 9
DIMENSION
…………………………………………………………………
... 10
IR & White light active
…………………………………………………………
.11
2
The camera includes auto white balance mode(AWB)
，
auto capture
color temperature. The range is 2400
°
K~9400
°
K
。
SENSOR
：
Auto Cell Device Sensor, the IR LED would on when night
comes to make up lightness. IR LED would not on in the day,
to reduce power consumption. Illumination is 8 LUX (LED on)
/ 9LUX(LED off)
。
LENS
：
Super sensitivity sensor IRIS (BOARD LENS 6.0mm)
LED : IR LED x 12, angle 35
˚
/ White light LED x 8, angle 30
˚
4
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of insulated dangerous Voltage within the
product
’
s enclosure that may be sufficient magnitude
to constitute risk of electrical shock to persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operation and maintenance (servicing) instructions in
the literature accompanying the appliance.
Sensor
LENS
White light LED
IR LED
1. Intelligent camera supported motion detection system with
white light and IR LED
2. Unlike other general IR cameras which can only present
B/W image at night, exclusively design as a motion
detection system to activate the white light LED within
camera lens range distance in color image
3. Power saving control, also it can be an auxiliary lighting
and warning purpose
