Hi-SCOM BN48-IP66, Installation Manual

Page: 4 / 22

Installation BN48-IP66
4
Release 01 11/2019
Safety instructions

General safety instructions
You operate this device with electricity. Improper usage of the device
entails the risk of physical injury or significant property damage. The
proper and safe operation of this device depends on proper handling
during transportation, proper storage and installation, and careful
operation and maintenance procedures.

Before connecting any cable, read this document, and the safety
instructions and warnings.

Operate the device with undamaged components exclusively.

The device is free of any service components. In case of a
damaged or malfunctioning the device, turn off the supply voltage
and return the device to Hiscom for inspection.

Certified usage

Use the product only for the application cases described in the
Hiscom product information, including this manual.

Operate the product only according to the technical specifications.
See “Technical data” on page
20

Connect to the product only components suitable for the
requirements of the specific application case.

Installation site requirements

Install this device in an operating site with restricted access, to
which maintenance staff have exclusive access.

Device casing
Only technicians authorized by the manufacturer are permitted to
open the casing.

Install the device in the vertical position, with the power supply
connections pointing downwards.

At ambient air temperatures > 131°F (+55 °C):
The surfaces of the device housing may become hot. Avoid
touching the device while it is operating.

To preserve the suitability of your device for IP65/67, proceed as
follows:

Remove the provided transport protection caps and the transport
protection screws from the device.

Seal unused sockets and plugs with your desired type of
protection.

Qualification requirements for personnel