The system event logs will be displayed.
Figure 294: Event Logs
3. View the system FRU logs by issuing the command ipmiutil fru –N <IP ADDRESS> –U <USERNAME>
–P <PASSWORD>.
The system FRU logs will be displayed.
Figure 295: FRU Logs
4.4.2.5
Power Off/Reset the Enclosure using IPMIutil
1. Launch a Command Prompt by clicking Start > Command Prompt.
The IPMIutil Terminal will appear.
2. Determine if the enclosure should be powered off or restarted. Complete only one of the following steps
based on what option is needed.
3. Power off the enclosure by issuing the command ipmiutil power –N <IP ADDRESS> –U <USERNAME>
–P <PASSWORD> -d.
200
4
System Management
User Guide
4.4
IPMI Overview
