Operational
Non-Operational
Specification
shocks to allow for write/read
recovery
0.10G,0 - peak swept sine; 5 -500Hz;
1 complete sweep @ 1/2octave per
minute
0.75G, 0 - peak swept sine; 5 -500Hz;
1 complete sweep @ 1/2 octave per
minute
Vibration
95.25 kg / 210 lbs.
Weight
W:
447mm x
L:
1197 mm x
H:
175mm /
W:
17.6in. x
L:
47.13in.. x
H:
6.89in.
Dimensions with CMA
1026 mm / 40.39in.
Length without CMA
450mm with (17.72in.) with 465mm (18.31in.) ± 1.5mm nominal hole
spacing. See EIA-310 Rack Standard
Required Rack Width
1200 mm (47.24in.) of usable rack space, frame to frame
Required Rack Depth
4U
Rack Units (U)
32 in. - 36 in.
Vertical Rack Rail Spacing
Table 5: Performance Specifications
Value
Specification
Intel Sawtooth Pass S2600ST
Mother Board
Intel Skylake
Processor Type
LGA3647-0 (Socket P) processor sockets
Socket
2
Number of Processors
Lewisburg PCH C624 Chipset
Chipset
DDR4 ECC DIMM
Memory Type
16 (8 per CPU)
Number of Memory Slots
Integrated
Graphics
AST2500
Sever BMC Chip
60 HDD / 8 SSD
Number of Drive Slots
12Gbps SAS / 6Gbps SATA
Data Transfer Rates
720TB using 12TB HGST Ultrastar
®
He12 HDDs / 61.44
TB using HGST Ultrastar
®
SS300 SSDs
Max Raw Data Storage Capacity
1.4
Ultrastar 8 Rack Requirements
The Ultrastar 8 is designed to be installed into a rack that meets the EIA-310 standard at a minimum
1200 mm (47.24in.) of usable rack space, frame to frame. The vertical rack rails must be set between 32 in.
10
1
Overview
Installation Guide
1.4
Ultrastar 8 Rack Requirements
