PCL 600
Operators Manual
v 2.0
65
Error number
Error text
Problem/Reference chapter
Infeed
014:019:002
Infeed home timeout.
It has taken too long to home the
sideways infeed, turn off ‘Slow’
material handling if it is activated.
Check that the home switch is
working. Try again.
014:019:003
Infeed not on home switch.
Home the sideways infeed. If the
problem remains, try moving the
infeed manually a small amount and
then home.
014:019:004
Infeed not calibrated.
014:019:006
Infeed. Move to zero error, not on switch.
014:019:012
Error, No material found on loading table.
Check that there is material present
and correctly positioned on the
infeed table. Add material to the
autocut list.
014:019:013 Error
loading
material.
014:019:017
No bar on infeed table found.
014:019:019
Error pushing the bar, no bar on table?
014:019:020
Infeed chain did not return to zero position.
Home the sideways infeed.
014:019:021
Slots did not open, probably stuck.
One or more of the slot locks for
small material is stuck in its current
position. Find it, free it and try again.
014:019:028
Cannot feed in material, material already at sensor
on infeed table or one of the sensors is damaged.
Is there already material on the
track? Remove it. Is the infeed
sensor is blocked/dirty/damaged.
Clear the obstruction or clean the
sensor.
014:019:034
Cruise ship. Material too small <size>
This material is too small to be cut
by this machine.
014:019:035
Failed calibrating infeed.
Turn off ‘Slow’ material handling if it
is activated. Check that the home
switch is working. Try again.
014:019:037
Error closing slot lock <slot lock number>.
The named slot lock for small
material is stuck in its current
position. Free it and try again.
014:019:040
Slot lock <slot lock number> open.
Printer
014:025:001
Error resetting printer communication, printer on?
Check the connections to the
printer. Check if the printer is
running. Check for an error light on
the printer.
014:025:002
Timeout printer home.
It has taken too long to home the
printer. Check that the switch is not
dirty or damaged. Check that the
motion runs smoothly. Check for a
dip in the air pressure. Try again.
014:025:004
Printer axis not calibrated
Home the printer.
014:025:006
Print head initialisation failed.
Check the connections to the
printer. Check if the printer is
running. Check for an error light on
the printer.
