PCL 600
Operators Manual
v 2.0
3
Preface
This manual is part of a set of manuals for the PCL 600 robotic cutting machine. In this manual you will find
the operating instructions. The complete set of manuals consist of the following manuals:
Operator’s manual
Contains information concerning the safe operation of the machine. Includes
a list of screen messages with explanations.
Maintenance and
Grease Schedule
Contains information about periodic maintenance and the lubrication
programme for the machine and it’s parts.
Software Restore
Contains instructions on how to restore the machine software in the event of
a computer crash.
Robot control manual
A short overview of the information needed to safely operate the Staubli
TX60L robot. Full details of the robot and controller can be found in the
Staubli manuals delivered with this manual set.
Plasma Unit
User’s Manual
Contains operating instructions and cutting information for the plasma unit.
ProCAM Manual –
Framework and ProGRAM
Contains instructions and description of the ProCAM software including
programming instructions and nesting.
Course Book ProCAM
Framework
Course book for the ProCAM software with exercises demonstrating the use
of ProCAM.
Technical Manual
Contains mechanical and electrical drawings and connection list for all
cables.
For safe operation and to ensure the reliability of the cutting machine it is necessary that all the above
manuals are available to all the people who work with the machine and to those who are related to the
machine, such as maintenance and service engineers and the work preparation engineers.
Document conventions
There are four levels of special notation used in this manual:
WARNING!
A warning statement typically describes the potential hazard, it’s possible effect and the
measures that must be taken to reduce the hazard.
CAUTION!
Damage to the equipment or products could result if the specified action is not complied
with.
ATTENTION!
Provides extra information to notify the user for potential problems.
NOTE.
Provides information or gives a tip for easier operation.
