19
6.
Usage Tips and Troubleshooting
Your safety:
Your robot SPOT PRO 100 has been manufactured according to the most rigorous
standards. To ensure a safe operation, follow the instructions and the security rules
indicated in this technical manual.
•
Only connect the control box to a power outlet equipped with a ground terminal and
protected by a residual differential current protection device of up to 30 mA.
•
To avoid the risk of electric shock, never open the control box. Call in a qualified
technician.
•
Never try to repair the power cable. Contact the After-Sale Service to have it replaced
with the original spare part to avoid any injury.
Usage tips:
Use your SPOT PRO 100 vacuum robot as often as possible: you will enjoy a pool that's
always clean and the filter bag will clog slower.
•
Never use the robot in the pool which bottom you can't see or with too high a level
of algae.
•
Keep the original packaging to store the robot in winter.
•
Store the robot in a ventilated frost-free room, not containing chemicals and acids.
•
Do not use the cleaner to mix or suck chemicals on the bottom of the pool.
•
Do not leave the cleaner or its control box in the sun.
•
Remove or pull up the wall ladders, if possible.
•
All checks and modifications must be carried out only by authorized staff.
•
For better cleaning of the bottom of the pool, only start working when the pool is
empty for some time and the dirt has completely fallen to the bottom.
ATTENTION!
Never start the machine out of water.
To stop the machine immediately, press the started program or STOP
on the radio control on your phone, or better, disconnect the power
plug from the mains.
