17
5.
A.
Cleaning of filter
We recommend that the owner of CROCODILE
ROCK clean the filters after each cycle of the robot.
For proper cleaning of the filter bag:
1-Turn off the pool cleaner by pressing the “I”
button on the control panel.
2-Turn the cleaner upside down.
3-Unhook the 4 stainless steel fixing levers “A”
4-Pull out the black filter holder.
5-
Take out the filter bag and clean it with a
strong jet of clear water or if necessary with
slightly soapy water. In this case, rinse thoroughly.
Do not wring it out, do not pass it to the
washing machine.
Do not clean with a high-pressure cleaner.
STAINLESS STEEL FIXING LEVERS
Open
Closed
6- Put everything back in place; fit the filter holder and make sure you respect the
direction of assembly (keying).
The robot should be cleaned regularly with clear water and you must control and
possibly remove any waste stuck in the drive or in the turbine.
No external mechanical parts require any special lubrication or maintenance.
Make sure that the filters do not overflow and prevent the filter plate from being closed
improperly.
NB :
there are 3 types of filter bag, corresponding to a different finesse of filtration: ultra-
thin, classic and large debris.
WARNING!
Any manipulation on the robot absolutely requires that the
robot is completely disconnected from the mains.
