Chapter 3 Configure the MarinePak7 Using the LCD UI
Press the
Up
and
Down
buttons on the keypad to move between configuration settings. Move to the
parameter that is to be configured and press the
Enter
button to enable EDIT MODE<>. Use the arrow
buttons to change the configuration. Press the
Enter
button to save the configuration.
Latitude
Use the
Up
and
Down
buttons to change the latitude of the MarinePak7.
The value range for the latitude is -90 to +90 (degrees).
Longitude
Use the
Up
and
Down
buttons to change the longitude of the MarinePak7.
The value range for the longitude is -180 to +180 (degrees).
Height (MSL)
Use the
Up
and
Down
buttons to change the height of the MarinePak7 relative to mean sea level.
The value range for the height is -1000 to +20000000 (metres)
After entering the base station coordinates, the position type will display FIXEDPOS and correction
messages will start transmitting from the selected output port.
3.3 Heading Status
The Heading Status screen provides the real-time ALIGN heading measurement and standard deviation.
MarinePak7 User Manual 2
32
