LS-R-4.8
7
NOTICE
Possible damage to the laser scanner
Deposits on the optical windows have a significant effect on the measuring accuracy of the laser scanner.
•
Avoid drips or heat damage to prevent a decrease in accuracy or sensitivity.
•
Do not touch the optical windows on the laser scanner.
•
Do not use solvents to clean the housing of the laser scanner.
•
Store only within the specified storage temperature range, see chapter 1.5.1.
•
Avoid the formation of condensation on the optical elements, e.g. by quickly changing the temperature.
INFORMATION
The information given in this manual can be changed by the manufacturer at any time. Thus the user is
responsible to regularly inquire about updated information.
1.1.3 Validity
These operating instructions are valid for the hardware available at the date of creation of these operating
instructions. The manufacturer reserves the right to make technical modifications.
1.2 Purpose
The LS-R-4.8 laser scanner is used for measuring and detecting various workpiece geometries (e.g. arches,
surfaces, corners, edges, areas, slots, grooves, curves, cut-outs, polygons, shanks and spherical surfaces). It is also
suitable for measuring complex geometries, like three-dimensional surfaces and for measurements involving pivot
axes. The measured workpieces can consist of a variety of different materials (e.g. processed, semi-finished,
punched, forged, cast material, as well as dark materials such as rubber and carbon fibre).
Radio-wave transmission ensures that the measuring signals from the laser scanner can be transmitted to the
receiver over large distances.
The measuring results are evaluated using the program
HxGN NC Measure
.
Summary of Contents for LS-R-4.8
Page 1: ......
Page 12: ...Description LS R 4 8 12 1 7 Markings Markings 2 3 4 5 6 7 1...
Page 34: ......
