User manual - Machine Automation Solution - V3R003
80 / 102
·
Language and region;
·
Support;
·
External settings;
·
System mode;
·
Network troubleshooting.
Advanced mode
In this mode, other than the basic features in normal mode, the user has access to advanced features of the on-board
computer. Used mainly by technicians.
The following features are enabled in advanced mode:
·
Change password;
·
Logging;
·
Network;
·
Activation;
·
Firmware update;
·
Access to the GNSS option in the Settings menu;
·
Data synchronization;
·
PLC;
·
Add, edit, and remove vehicle;
·
Add, edit, and remove implement.
13.1.4 Support mode
This option gives specialized technicians access to installation settings and advanced tests. This operation can only be
performed entering a password.
To access the assistance options, proceed as follows
:
1.
Select option
Settings
from the
Configuration menu
;
2.
Select option
Support
;
3.
Enter the password and press
OK
.
The following features are enabled when
Support
is selected
:
·
Advanced file transfer
;
·
Implement motor test
;
·
Firmware test
and
Firmware transfer
;
·
Enable/disable
Monitoring mode
;
·
Enable/disable
Navigation mode
with routes
.
13.1.5 Network troubleshooting
Informs on the situations of the connections of the drivers connected to the CAN network and the display.
Commands
Description
OK
All function drivers are connected.
NC,X
Function driver number X is not on the network.
EX,X
Driver X is spare on the network.
Conflict
Two drivers with the same address.
Not installed
Implement does not require this type of driver.
