User manual - Machine Automation Solution - V3R003
53 / 102
11.1.3 Reverse detector
Enable this function to detect when the vehicle is in reverse.
To alter the automatic reverse detection settings, proceed as follows:
1.
Access the
Guidance
option from the
Configuration menu
;
2.
Select the
Reverse detector
option;
3.
Press the
Detect reverse
option to alternate between
Yes
and
No
;
4.
Press
OK
to confirm the operation.
Warning
For using the automatic pilot, the reverse detector must be activated.
Important
In case you want to inform the display
that the reverse direction is inverted, simply select the
Invert direction
option.
Important
It is recommended to keep the
Reverse detector
active for correctly marking the trail.
Figure - Reverse detector
On the operation screen, while the display detects reverse, a red backwards arrow will show. When the display
is detecting
forward movement, a green forward arrow will show for ten seconds, as shown in the figure below.
Figure - Reverse detector in operation
Figure - Operation
