User manual - Machine Automation Solution - V3R003
17 / 102
7. Operation screen
The operation consists of the main screen where the activities are in fact executed according to all the configured
parameters and activations.
The display operation screen changes to suit the context of use that depends on the vehicle and related activity. For
example, truck-type vehicles performing trips use the
Mode of operation with routes
, while tractors in the field use the
Mode of operation with lightbar.
Warning
In case alerts exist, they will be displayed above the operation screen before execution
begins.
Operation screen with lightbar
During operation, in order to provide a broader view of the field, only the following information and features will be visible:
1.
Alerts
2.
Notifications bar
3.
Connectivity information
4.
Operation bar
5.
Lightbar
6.
Suspended operation
7.
Operation information
Figure - Operation screen with lightbar
7.1 Upper bar
7.1.1 Alerts
Important
Before starting any operation, make sure that are no active alerts.
Alerts are displayed automatically on the screen during the operation. The operator may close them, but if the condition
which triggered the alert continues to occur, the alert will be displayed on the top of the screen.
Slide the notification bar downwards to visualize the list of notifications and to preview the messages. Slide the bar
upwards to close it again.
Figure - Alert notification
Important
When a notification message is clicked on, it is removed from the notification list but is still
accessible through the alert icon on the upper left corner.
Click on the alert icon to access all active alarms and to obtain more detailed information on how to troubleshoot the
problem.
