HEX-BEAM SP7IDX MARK IV HD, Instructions Manual

Page: 36 / 68

36
Pay attention to the type of applied washer!
Pay much attention during this stage - electric lines cannot be
overtightened. You need to feel that they're a bit loose when you touch them, they
need to hang down to avoid their breakage during strong wind or snow. To
correct the lead tension - loosen or tighten one of the lead holders, two or three
pieces - this doesn't affect proper operation of a given band. When the heights
and clearances of the fixed holders are set - mark those points with a marker and
wind 2-3 rolls of insulation tape in order to minimize potential backlash- (option).