HEX-BEAM SP7IDX MARK IV HD, Instructions Manual

Page: 35 / 68

HEX – BEAM SP7IDX TECHNOLOGY 35
The fixing of bands should begin with the lowest band, i.e. 6M - which is the closest to
the centre post. Then 10M, 12M, 15M, 17M and 20M.
numbers on centerpost and band
1-20m
2-17m
3-15m
4-12m
5-10m
6-6m
The leads have the same band symbols as the centre post. Fix the closed loop on one
side of the lead on screw in centre post, then keep putting it through holders on poles
until you reach the second screw in the centre post.
If the lead is too loose or cannot reach the second screw, move the holders on pole
upward and downward to correct the distance of the lead.
Since each bolt
the centerpost
is provided with locknuts , do not over
!!!!!!
DO NOT
over tighten the wires !!!!!! . The wires should be a little slack. But you
might need to pull a little to get the lugs onto the screws.