Regulatory compliance identification numbers
For the purpose of regulatory compliance certifications and identification, each product is assigned a unique
regulatory model number. The regulatory model number can be found on the product nameplate label, along
with all required approval markings and information. When requesting compliance information for the product,
always refer to this regulatory model number. The regulatory model number is not the marketing name or
model number of the product.
The Regulatory Compliance label is on the bottom of the library. To view this information, from the back of the
library, tilt the library up until the label is visible.
Product-specific information:
Regulatory model number: LVLDC-0501
FCC and CISPR classification: Class A
These products contain laser components. See Class 1 laser statement in
Safety and Compliance Information
for Server, Storage, Power, Networking, and Rack Products
, available at
Safety-Compliance-EnterpriseProducts
Manufacturer: Hewlett Packard Enterprise Company, Palo Alto, California
Manufacturer’s representative: ZAO Hewlett-Packard A.O.
Default and restore defaults settings
You can save the libraryconfiguration settings to a file, restore the settings, or reset the library configuration to
the default settings. The following table lists the library configuration parameters, with their default settings
and whether they are reset to default or saved to a file.
Table 49: Default settings
Parameter
Default setting
Reset by Set Defaults
Stored in Saved
Config file
Tape drive settings
SCSI drive
address
• MSL2024: A full-height tape
drive has SCSI ID 4. The bottom
half-height tape drive has SCSI
ID 4 and the top drive has SCSI
ID 5.
• MSL4048: All full-height tape
drives have SCSI ID 4. Half-
height drive slots have SCSI ID
of 4, 5, 4, 5 from the bottom up.
• MSL8048 and MSL8096: All
tape drives have SCSI ID 4.
Yes
Yes
FC drive
configuration
Automatic speed, auto port type
Yes
Yes
Table Continued
240
Regulatory compliance identification numbers
