Updating tape cartridge inventory (Operations > Perform Inventory)
This option updates the library tape cartridge inventory. The device checks each slot and drive to determine
which tape, if any, is present.
NOTE:
This command is only needed if the inventory in the library is different than the inventory displayed on the
front panel, which would not happen under normal conditions.
Procedure
1.
From the Home screen, press
Previous
or
Next
until the screen displays
Operations
. Press
Enter
to
select.
2.
Press
Previous
or
Next
until the screen displays
Perform Inventory
. Press
Enter
to select.
3.
While the inventory is in progress, the screen displays
Inventory in Progress...
4.
The library now checks the drive and each slot for the presence of a tape to update the inventory
information. The
Ready
LED blinks during this operation.
Rebooting the library (Operations > Reboot Library)
This option reboots the library and forces a new cartridge inventory, clearing any current error condition.
CAUTION:
This option interrupts the current backup or restore operation and causes the operation to fail. Use this
option if the device is in an error state.
Procedure
1.
From the Home screen, press
Previous
or
Next
until the screen displays
Operations
. Press
Enter
to
select.
2.
Press
Previous
or
Next
until the screen displays
Reboot Library
. Press
Enter
to select.
3.
The
Ready
LED blinks during the reboot operation.
Enabling password locks (Operations > Enable Library Password Locks)
This option locks the restricted areas. This option is typically used if you do not want to wait for the time out to
reset the locks. Power cycling or rebooting the library also resets the locks.
Procedure
1.
From the Home screen, press
Previous
or
Next
until the screen displays
Operations
. Press
Enter
to
select.
2.
Press
Previous
or
Next
until the screen displays
Enable Library Password Locks
. Press
Enter
to
select.
Accessing the support functions
The Support menu provides access to the following support functions:
116
Updating tape cartridge inventory (Operations > Perform Inventory)
