manualshive.com logo in svg

Hewlett Packard Enterprise Smart Array P416ie-m SR Gen10 Controller, User Manual

Share
Download
Hewlett Packard Enterprise Smart Array P416ie-m SR Gen10 Controller User Manual Download Page 28

To replace the drive, reverse the removal procedure.

HPE Smart Array controller installation guidelines

• Make sure that mezzanine cards are installed in server mezzanine slots that map to the selected Synergy frame

interconnect bay.

• For the Synergy 480 compute module, it must occupy mezzanine slot 1.

• For the Synergy 660 compute module, it must occupy mezzanine slot 1 or mezzanine slot 4.

IMPORTANT: For more information about the association between the mezzanine bay and the interconnect bays,
see the HPE Synergy 12000 Frame Setup and Installation Guide in the Hewlett Packard Enterprise Information
Library (

http://www.hpe.com/info/synergy-docs). Where you install the mezzanine card determines where to

install the interconnect modules.

Installing Smart Array controller

Procedure

1.

Power down the compute module.

2.

Remove the compute module.

3.

Place the compute module on a flat, level work surface.

4.

Remove the access panel.

5.

Locate the appropriate mezzanine connector. To locate the connector, see "

P542D controller ports and connectors" or

"

P416ie-m controller ports and connectors."

6.

Remove the front panel/drive cage assembly.

7.

Remove the mezzanine connector cover, if installed.

8.

Install the mezzanine card. Press firmly on the 

PRESS HERE label above the mezzanine connector to seat the card.

28 Deployment

Summary of Contents for Smart Array P416ie-m SR Gen10 Controller












































































Reviews:

No comments

Brands by name

Popular brands

Load more brands