Hewlett Packard Enterprise ProLiant XL190r Gen10, User Manual

Page: 176 / 183

Description Chassis Fan configuration Number of drives
supported by the server
Maximum inlet
ambient
temperature
Apollo r2600 Gen10
Chassis
(24 SFF or 16 SFF
+ 8 NVMe
backplane)
Redundant and
nonredundant 0 to 10 drives
22°C (71°F)
Apollo r2800 Gen10
Chassis
(24 SFF backplane
with SAS expander)
Redundant and
nonredundant 0 to 24 drives
22°C (71°F)
Apollo r2800 Gen10
Chassis
(16 NVMe
backplane)
Redundant and
nonredundant 0 to 8 drives
22°C (71°F)
1
The drive capacity must be less than 10 TB.
2
The drive capacity must be greater than or equal to 10 TB.
3
If the component is installed in server 1, and the server is installed in the Apollo r2200 Gen10 Chassis, drive blanks
must be installed in drive bays 1-2 and 1-10. Similarly, if the component is installed in server 3, and the server is
installed in the Apollo r2200 Gen10 Chassis, drive blanks must be installed in drive bays 3-2 and 3-10. For more
information, see
Installing drive blanks and thermal bezel blanks for components with thermal limitations on
page 23.
4
If NVIDIA Tesla M10 Quad GPUs are installed in the server, and the server is installed in the Apollo r2200 Gen10
Chassis, increase the maximum ambient temperature by installing drive blanks in specific drive bays. For more
information, see
Installing drive blanks and thermal bezel blanks for components with thermal limitations on
page 23.
5
If NVIDIA Tesla P4 GPUs are installed in the server, and the server is installed in the Apollo r2200 Gen10 Chassis,
increase the maximum ambient temperature by installing drive blanks in specific drive bays. For more information,
see
Installing drive blanks and thermal bezel blanks for components with thermal limitations on page 23.
6
If NVIDIA Tesla P40 GPUs are installed in the server, and the server is installed in the Apollo r2200 Gen10 Chassis,
the drive blanks must also be installed in specific drive bays. For more information, see
Installing drive blanks and
thermal bezel blanks for components with thermal limitations on page 23.
7
To ensure proper thermal cooling with NVIDIA Tesla P100 GPUs or NVIDIA Tesla V100 GPUs installed in the server,
the server must be installed in the Apollo r2200 Gen10 Chassis or the Apollo r2600 Gen10 Chassis. The thermal
bezel blanks must also be installed in specific drive bays. For more information, see
Installing drive blanks and
thermal bezel blanks for components with thermal limitations on page 23.
8
If the component is installed in server 1 and the server is installed in the Apollo r2200 Gen10 Chassis, bezel blanks
must be installed in drive bays 1-9, 1-10 and 1-11. If the component is installed in server 3 and the server is installed
in the Apollo r2200 Gen10 Chassis, bezel blanks must be installed in drive bays 3-9, 3-10 and 3-11. For more
information, see
Installing drive blanks and thermal bezel blanks for components with thermal limitations on
page 23.
9
If the component is installed in server 1 and the server is installed in the Apollo r2600 Gen10 Chassis, bezel blanks
must be installed in drive bays 1-9 to 1-14. If the component is installed in server 3 and the server is installed in the
Apollo r2600 Gen10 Chassis, bezel blanks must be installed in drive bays 3-9 to 3-14. For more information, see
Installing drive blanks and thermal bezel blanks for components with thermal limitations on page 23.
176 Specifications