Editing or removing user accounts
Procedure
1.
From the
System Utilities
screen, select
System Configuration
>
iLO 5 Configuration Utility
>
User Management
>
Edit/Remove User
.
2.
Select the
Action
menu for the user account you want to edit or delete.
3.
Select one of the following.
•
Delete
—Deletes the user account.
•
Edit
—Enables you to edit the user login name, password or user permissions.
4.
Update as many user accounts as needed, and then save your settings.
Setting Options
Use this menu to view and configure iLO access settings.
•
iLO 5 Functionality
—Specifies whether iLO functionality is available. When this setting is enabled
(default), the iLO network is available and communications with operating system drivers are active.
When this setting is disabled, the iLO network and communications with operating system drivers are
terminated.
The iLO network and communications with operating system drivers are terminated when iLO
functionality is disabled.
NOTE:
For ProLiant blade servers, the iLO functionality cannot be disabled on blade servers.
•
iLO 5 Configuration Utility
—Enables or disables the iLO 5 Configuration Utility.
If this option is set to
Disabled
, the iLO 5 Configuration Utility menu item is not available when you
access the UEFI System Utilities.
•
Require Login for iLO 5 Configuration
—Determines whether a user-credential prompt is displayed
when a user accesses the iLO 5 functionality.
If this setting is
Enabled
, provide user credentials for functions, including updating with SUM and
RESTful Interface Tool.
•
Show iLO 5 IP Address during POST
—Enables the display of the iLO network IP address during
host server POST.
•
Local Users
—Enables or disables local user account access.
•
Serial CLI Status
—Specifies the login model of the CLI feature through the serial port. Settings are:
◦
Enabled-Authentication Required
—Enables access to the iLO CLP from a terminal connected to
the host serial port. Valid iLO user credentials are required.
◦
Enabled-No Authentication Required
—Enables access to the iLO CLP from a terminal
connected to the host serial port. iLO user credentials are not required.
◦
Disabled
—Disables access to the iLO CLP from the host serial port.
Use this option if you are planning to use physical serial devices.
•
Serial CLI Speed (bits/second)
—Specifies the speed of the serial port for the CLI feature. Settings
(in bits per second) are:
22
System Configuration
