manualshive.com logo in svg

Hewlett Packard Enterprise HPE XP7, User Manual, Page: 53 / 311

Share
Download
Hewlett Packard Enterprise HPE XP7 User Manual Download Page 53

Sharing Fast Snap volumes with Thin Provisioning and Thin Provisioning
MF in a single storage system

If you are using Fast Snap, Thin Provisioning, and Thin Provisioning MF in a single storage system, note
the following when creating Fast Snap pairs:

• Data compressed or deduplicated by the capacity saving function is copied to a volume. The capacity

saving function is not performed immediately for copied data. Before creating or resynchronizing a
Fast Snap pair, make sure that the available capacity in the copy destination volume is greater than
the used capacity in the copy origination volume. For details, see the 

HPE XP7 Provisioning for Open

Systems User Guide

.

• If you create a Fast Snap pair using a volume with the capacity saving function enabled, the

compressed or deduplicated data is copied. Because of this, copy or I/O performance may be
degraded.

Sharing Fast Snap volumes with Thin Provisioning and Thin Provisioning MF in a single storage system

53

Summary of Contents for HPE XP7
























































































































































































































































































































Reviews:

No comments