manualshive.com logo in svg

Hewlett Packard Enterprise HPE XP7, User Manual, Page: 238 / 311

Share
Download
Hewlett Packard Enterprise HPE XP7 User Manual Download Page 238

Item

Description

Mirror Unit

The mirror unit number.

Cascade

Indicates whether a cascaded pair can be created.

•

Enabled

 Cascaded pairs can be created.

•

Disabled

 Cascaded pairs cannot be created.

A hyphen (-) is displayed for non-FS pairs.

Type

The pair type.

•

Snapshot

 A pair with the snapshot attribute.

•

Clone

 A pair with the clone attribute.

A hyphen (-) is displayed for non-FS pairs.

Topology ID

The topology ID, which indicates the layer of the pair based on the
mirror unit. The topology ID consists of the LDEV ID of the volume
(root volume for Fast Snap pairs) and the mirror unit number.

History window

The following image shows this window.

Setting fields

The following table lists the items on the 

History

 window.

238

 History window

Summary of Contents for HPE XP7
























































































































































































































































































































Reviews:

No comments