manualshive.com logo in svg

Hewlett Packard Enterprise HPE XP7, User Manual, Page: 231 / 311

Share
Download
Hewlett Packard Enterprise HPE XP7 User Manual Download Page 231

Item

Description

Secondary Volume

The S-VOL information.

Values:

•

LDEV ID

The S-VOL's LDEV identification number. Click to open

the 

LDEV Properties

 window.

•

LDEV Name

The S-VOL's LDEV name.

•

CLPR

The S-VOL's CLPR ID.

•

Virtual Storage Machine

The model type and serial number of the

virtual storage machine to which the S-VOL belongs.

•

Virtual LDEV ID

The identification number of the S-VOL’s virtual

LDEV. If no virtual LDEV ID is assigned, a blank is displayed.

•

Virtual Device Name

The name of the S-VOL’s virtual device, in a

combined format of "virtual emulation type", "number of virtual
LUSE volumes", and "virtual CVS attribute". Each of these three
items is displayed only if it is specified. If none of them are
specified, a blank is displayed.

•

Virtual SSID

The virtual SSID of the S-VOL. If no virtual SSID is

specified, a blank is displayed.

Mirror Unit

The mirror unit number.

Cascade

Indicates whether a cascaded pair can be created

•

Enabled

 Cascaded pairs can be created.

•

Disabled

 Cascaded pairs cannot be created.

A hyphen (-) is displayed for non-FS pairs.

Type

The pair type.

•

Snapshot

 A pair with the snapshot attribute.

•

Clone

 A pair with the clone attribute.

A hyphen (-) is displayed for non-FS pairs.

Topology ID

The topology ID, which indicates the layer of the pair based on the
mirror unit. The topology ID consists of the LDEV ID of the volume
(root volume for Fast Snap pairs) and the mirror unit number.

Refresh button

Click to update the information in this table.

View Pair Properties window

The following image shows this window.

View Pair Properties window

231

Summary of Contents for HPE XP7
























































































































































































































































































































Reviews:

No comments