manualshive.com logo in svg

Hewlett Packard Enterprise HPE XP7, User Manual, Page: 206 / 311

Share
Download
Hewlett Packard Enterprise HPE XP7 User Manual Download Page 206

SSB2

RAID Manager
command

Cause of error

97DA

paircreate, mount
snapshot

The command ended abnormally because the T10 PI settings for the
P-VOL and S-VOL did not match.

97DD

unmount snapshot/
replace snapshot

The command ended abnormally because you specified a pair to
which an S-VOL is not assigned.

97DE

mount snapshot/
unmount snapshot/
replace snapshot

The operation failed because different DKCMAIN microcode versions
are mixed. Confirm DKCMAIN microcode version.

97DF

mount snapshot

The command ended abnormally because you specified an S-VOL
that is assigned to a pair.

97F1

replace snapshot

The command ended abnormally because the pair cannot be
identified from snapshot data and the P-VOL that you specified.

97F1

mount snapshot/
replace snapshot

The command ended abnormally because you specified a pair to
which an S-VOL is assigned.

97FA

unmount snapshot/
replace snapshot

The command ended abnormally because you specified an S-VOL
that is not assigned to a pair.

B912

paircreate, pairsplit,
pairresync

The FS pair task failed because you specified the incorrect S-VOL.

B9A7

All commands

You cannot retrieve the consistency group information because FS is
not installed.

FF58

pairsplit, pairresync,
pairresync -restore

The command ended abnormally because the specified pair is a
cascaded pair.

FF59

paircreate

The command ended abnormally because the specified P-VOL is
used by a cascaded pair.

FF6D

paircreate

The command ended abnormally because the specified P-VOL is
used by a cascaded pair.

FF72

paircreate, pairsplit,
pairresync,

pairresync -restore

The Fast Snap pair task failed because a snapshot tree is being
deleted.

FF7A

paircreate

The Fast Snap pair could not be created because the V-VOL capacity
exceeded the amount reserved for the pool.

FF7C

paircreate

The Fast Snap pair whose snapshot data is stored in the THP pool
could not be created because system option mode 1120 is set to ON.

Notes on using Fast Snap primary volumes as Continuous Access
Synchronous, Business Copy, or Continuous Access Journal pair volumes

Following are possible reasons why the pair status cannot be changed:

206

 Notes on using Fast Snap primary volumes as Continuous Access Synchronous, Business Copy, or

Continuous Access Journal pair volumes

Summary of Contents for HPE XP7
























































































































































































































































































































Reviews:

No comments