manualshive.com logo in svg

Hewlett Packard Enterprise HPE XP7, User Manual, Page: 178 / 311

Share
Download
Hewlett Packard Enterprise HPE XP7 User Manual Download Page 178

Troubleshooting Fast Snap

If your site experiences workflow, configuration, or management issues while working with Fast Snap,
such as a volume that is blocked, then you can troubleshoot them by referring to the possible problem
causes and solution procedures.

Overview

Types of troubleshooting tasks are categorized as follows:

• General troubleshooting

• Procedures for recovering from pool failures (SIM = 601xxx, 602xxx, 604xxx, 605xxx, 606xxx)

• Troubleshooting the source of SIM codes

Failures in a cascaded configuration

If a failure occurs in a cascaded configuration, the following volumes are suspended in addition to the
volume where the failure occurred:

• Cascaded volumes under the failed volume.

• Volumes of which generation are older than the failed volume and cascaded volumes under the older

generation volumes.

The following figure illustrates the volumes to be suspended when a failure occurs.

178

 Troubleshooting Fast Snap

Summary of Contents for HPE XP7
























































































































































































































































































































Reviews:

No comments