manualshive.com logo in svg

Hewlett Packard Enterprise HPE XP7, User Manual, Page: 165 / 311

Share
Download
Hewlett Packard Enterprise HPE XP7 User Manual Download Page 165

5.

Accept the default task name or enter a unique name.
You can enter up to 32 letters, numbers, and symbols, except the following:

\ / : , ; * ? " < > |

6.

If you want to monitor the task after submitting it, select 

Go to tasks window for status

.

7.

Click 

Apply

 to submit the task.

Editing pool names

Prerequisites

• You must have the Storage Administrator (Provisioning) role.

• In RAID Manager, use the 

raidcom modify pool -pool 

command.

You can change the properties of a selected pool, such as its name.

Procedure

1.

In the 

Explorer

 pane, click 

Storage Systems

, expand the storage system tree, and then click 

Pools

.

Editing pool names

165

Summary of Contents for HPE XP7
























































































































































































































































































































Reviews:

No comments