Hewlett Packard Enterprise HPE XP7, User Manual, Page: 154 / 311

Prerequisites
• You must have the Storage Administrator (Provisioning) role.
• In RAID Manager, use the
raidcom get pool
command or the
raidcom get snap_pool
command.
You can view the used capacity of the physical capacity by the pool.
Procedure
1. In the Explorer pane, click Storage Systems , expand the storage system tree, and then click Pools .
2. View the used capacity of the pool in the Physical Capacity column of the Pools tab. This column is
not displayed by default. To see this column, add this using the Column Settings window.
Viewing used pool capacity by Fast Snap pair's root volume
For more information, see the volume tabs on the Pools window in the HPE XP7 Provisioning for Open
Systems User Guide .
Prerequisites
• You must have the Storage Administrator (Provisioning) role.
• In RAID Manager, use the
raidcom get snap_pool
command.
You can view used capacity of the pool which has the Fast Snap pool type by checking the Fast Snap
pair's root volume.
Procedure
1. In the Explorer pane, click Storage Systems , expand the storage system tree, and then click Pools .
2. In the Pools table, click the name of the pool for which you want to see the used capacity.
3. Select the FS Root Volumes tab.
The used pool capacity of each root volume (used capacity of the pool which has the Fast Snap pool
type) appears in the
Used column.
Viewing formatted pool capacity and pool usage rates
For more information about the formatted pool capacity and pool usage rates, and the View Pool
Management Status window, see the HPE XP7 Provisioning for Open Systems User Guide .
Prerequisites
• You must have the Storage Administrator (Provisioning) role.
• In RAID Manager, use the
raidcom get pool
command.
You can view the progress of rebalancing the pool usage rates among parity groups using the View Pool
Management Status window.
154 Viewing used pool capacity by Fast Snap pair's root volume