Hewlett Packard Enterprise HPE XP7, User Manual, Page: 153 / 311

3. In the selected pool window, in the Primary Volumes tab, view the following information about the
selected pool:
• LDEV ID Shows the combination of the LDKC, CU, and LDEV. Clicking the ID opens the LDEV
Properties window. Use this window to search for P-VOL information.
• LDEV Name Shows the LDEV name.
• Status For more information about this item, see the HPE XP7 Provisioning for Open Systems User
Guide .
• Used Pool Capacity Shows the used pool capacity.
• Pool Usage(%) Shows the pool usage rate.
• Number of Paths Shows the number of alternate paths.
• CLPR Shows the identifier and name of the CLPR in ID : CLPR format.
• Pool Management Task Shows the pool management task being performed on the pool.
• Virtual Storage Machine Shows information about the virtual storage machine.
4. (Optional) To export the information in the table, click Export .
More information
Editing the data pool warning threshold on page 163
Viewing used pool capacity
You can view used pool capacity by pool or by the Fast Snap pair's root volume.
Viewing used capacity by pool
For more information, see the Pools window in the HPE XP7 Provisioning for Open Systems User Guide .
Prerequisites
• You must have the Storage Administrator (Provisioning) role.
• In RAID Manager, use the
raidcom get pool
command or the
raidcom get snap_pool
command
Procedure
1. In the Explorer pane, click Storage Systems , expand the storage system tree, and then click Pools .
2. View the used capacity of the pool in the Used column of the Pools tab.
Viewing used capacity of the physical capacity by pool
For more information, see the Pools window in the HPE XP7 Provisioning for Open Systems User Guide .
Viewing used pool capacity 153