manualshive.com logo in svg

Hewlett Packard Enterprise HPE XP7, User Manual, Page: 139 / 311

Share
Download
Hewlett Packard Enterprise HPE XP7 User Manual Download Page 139

- BC/BC MF/Auto LUN: The number of BC, BC MF, and Auto LUN pair tables in use, and the BC,
BC MF, and Auto LUN pair table limit in the storage system.

- FS: The number of FS pair tables in use and the FS pair table limit in the storage system.

Number of Differential Tables

The number of differential tables that are in use and the differential table limit in the storage
system. This number does not include the number of differential tables that FC MF/FCSE
Relationships use.

NOTE: 

Differential tables are not used in Fast Snap.

Viewing the number of pairs

Prerequisites

You must have the Storage Administrator (Local Copy) role.

Procedure

1.

In the 

Explorer

 pane, click 

Storage Systems

, expand the storage system tree, expand 

Replication

,

and then click 

Local Replication

.

2.

In the summary section in the 

Local Replication

 window, for 

Number of Pairs

, view the number of

pairs.

More information

Viewing local replication summary information on page 137

Viewing the list of primary volumes

Prerequisites

• You must have the Storage Administrator (Local Copy) role.

• In RAID Manager, use the

 raidcom get snapshot 

command to view the list of pairs.

Procedure

1.

In the 

Explorer

 pane, click 

Storage Systems

, expand the storage system tree, expand 

Replication

,

and then click 

Local Replication

.

2.

In the 

Local Replication

 window, select the 

FS Root Volumes

 tab.

Viewing the number of pairs

139

Summary of Contents for HPE XP7
























































































































































































































































































































Reviews:

No comments