Hewlett Packard Enterprise HPE XP7, User Manual, Page: 134 / 311

Prerequisites
• You must have the Storage Administrator (Local Copy Pair Unmap) role.
• In RAID Manager, use the
raidcom unmount snapshot
command.
You can release the assignment of S-VOLs from snapshot data of Fast Snap pairs.
Procedure
1. In the Explorer pane, click Storage Systems , expand the storage system tree, expand Replication ,
and then click Local Replication .
2. In the Local Replication window, select a P-VOL in the FS Root Volumes tab or a snapshot group in
the Snapshot Groups tab.
3. Click Operate FS Pairs .
4. In the FS Pairs window, select the S-VOL pairs you want to delete, and then click More Actions >
Remove Secondary Volumes .
5. In the Remove Secondary Volumes window, confirm the settings.
6. Accept the default task name or enter a unique name.
You can enter up to 32 letters, numbers, and symbols, except the following:
\ / : , ; * ? " < > |
7. If you want to monitor the task after submitting it, select Go to tasks window for status .
8. Click Apply to submit the task.
More information
Remove Secondary Volumes window on page 305
Changing assignment of secondary volumes to Fast Snap
pair snapshot data
NOTE: If the amount of snapshot data in selected P-VOLs or the total number of pairs in selected
snapshot groups exceeds 32,768, an error message appears when attempting to perform pair tasks.
Prerequisites
• You must have the Storage Administrator (Local Copy) role.
• In RAID Manager, use the
raidcom replace snapshot
command.
Procedure
1. In the Explorer pane, click Storage Systems , expand the storage system tree, expand Replication ,
and then click Local Replication .
2. In the Local Replication window, select a P-VOL in the FS Root Volumes tab or a snapshot group in
the Snapshot Groups tab.
3. Click Operate FS Pairs .
134 Changing assignment of secondary volumes to Fast Snap pair snapshot data