Chapter 2
Components
15
the enclosure provides improved clarity in identifying the component items called out in the diagrams and described in
the tables. Descriptions are also provided for optional disk enclosures for expanding storage capacity.
NOTE Storage enclosures support hot-swap replacement of controller modules, PCMs, disk modules, and I/O modules.
Hot-add of disk enclosures is also supported.
MSA 2060/2062 controller module—rear panel components
The figure below shows four host interface ports configured with 16Gb FC SFP transceivers. See
HPE MSA Transceiver
Replacement Instructions
at
when installing qualified SFPs into FC controller modules.
1
3
8
2
= FC LEDs
4
5
6
7
1
Host ports: host connection or replication
5
CLI port (serial: service only)
2
Manufacturing port 3 (service only)
6
CLI port (USB–Type B)
3
Manufacturing port 2 (service only)
7
Network management port (RJ45)
4
Manufacturing port 1 (service only)
8
SAS expansion port (SFF-8644)
Figure 8 MSA 2060/2062 controller module face plate (16Gb FC)
The figure below shows four host interface ports configured with 10GbE iSCSI SFP transceivers. See
HPE MSA
Transceiver Replacement Instructions
at
when installing qualified SFPs into iSCSI controller
modules.
z
1
3
8
2
4
5
6
7
= 10GbE iSCSI LEDs
1
Host ports: host connection or replication
5
CLI port (serial: service only)
2
Manufacturing port 3 (service only)
6
CLI port (USB–Type B)
3
Manufacturing port 2 (service only)
7
Network management port (RJ45)
4
Manufacturing port 1 (service only)
8
SAS expansion port (SFF-8644)
Figure 9 MSA 2060/2062 controller module face plate (10GbE iSCSI)