7
Figure 2 Installation flowchart
Installing the router
Mounting the router on a workbench
IMPORTANT:
•
Make sure the workbench is clean, stable, and reliably grounded.
•
Maintain a minimum clearance of 10 cm (3.9 in) around the router for heat dissipation.
•
Do not place heavy objects on the router.
To mount the router on a workbench:
1.
Place the router upside down on the workbench and attach the rubber feet to the four round
holes in the chassis bottom.
Start
Determine the
installation location
Rack-mounting
End
Workbench-mounting
Ground the router
Mount the router
on a workbench
Mount the router
in a rack
Connect interface cables
Connect the router to a
configuration terminal
Connect the power cord
Verify the instalaltion
Power on the router
Operating corretly
Troubleshoot the
router
Power off the router
Yes
No