Heta SCAN-LINE SOLID C, Operating And Installation Instructions

Page: 25 / 32

25
3
4
5
6
1
3
2
4
(5
0
3
2
-0
0
8
2
)
1
8
2
4
(5
0
3
2
-0
0
9
2
)
90°
220
220
ø150
Under the Clean Air Act local authorities may
declare the whole or part of the district of the
authority to be a smoke control area. It is an of-
fence to emit smoke from a chimney of a buil-
ding, from a furnace or from any fixed boiler if
located in a designated smoke control area. It
is also an offence to acquire an” unauthorized
fuel” for use within a smoke control area unless
it is used in an” exempt” appliance (” exempted”
from the controls which generally apply in the
smoke control area).
In England appliances are exempted by publica-
tion on a list by the Secretary of State in accor-
dance with changes made to sections 20 and
21 of the Clean Air Act 1993 by section 15 of the
Deregulation Act 2015. Similarly, in Scotland ap-
pliances are exempted by publication on a list by
Scottish Ministers under section 50 of the Re-
gulatory Reform (Scotland) Act 2014. In Wales
and Northern Ireland these are authorized by
regulations made by Welsh Ministers and by the
Department of the Environment respectively.
Further information on the requirements of the
Clean Air Act can be found here:
https://www.gov.uk/smoke- control-area-rules
Your local authority is responsible for imple-
menting the Clean Air Act 1993 including desig-
nation and supervision of smoke control areas
and you can contact them for details of Clean
Air Act requirements
The Scan-Line Solid C high have all been re-
commended as suitable for use in smoke con-
trol areas when burning dry wood logs.
3. Appendix A
The clean air act 1993 and smoke control areas.