Operation
17
4.3 Charging Process
The charging process of the electrify charging stations is the same for all product variants.
No matter if you decide for the base, smart or other. Only the approval of the charging pro-
cess is different among each other.
4.3.1 Charging station without authorization (Plug and Charge)
Process Step
Information
Graphic
1. First check the operating
status of the eSat charging
station.
eSat charging station is
ready for operation with
green LED indicator.
2. Connect the charging plug
to the vehicle to be charged.
After the charging plug is
successfully connected to
the vehicle, the locking takes
place. Further information
can be found in the operating
instructions of the vehicle.
3. Charging is started.
After a successful authoriza-
tion, the loading process is
released. The LED indicator
lights up blue.
4. End charging process
prematurely.
The charging process can be
stopped via the vehicle. The
latter is taken from the
operating instructions of the
vehicle
Summary of Contents for eSat r20
Page 27: ...Notes 24 8 Notes...
