-
64
-
7
Troubleshooting
In case the following procedures cannot solve the problem, please contact Hesai technical support.
Symptoms
Points to Check
Indicator light is off on
the connection box
Verify that
·
power adapter is properly connected and in good condition
·
connection box is intact
·
input voltage and current satisfy the requirements in Section 2.3 (Connection Box)
Power on again to check if the symptom persists.
Motor is not running
Verify that
·
power adapter is properly connected and in good condition
·
if a connection box is used, the connection box is intact
·
input voltage and current satisfy the requirements in Section 1.4 (Specifications) and 2.3 (Connection Box)
·
web control can be accessed (see "cannot open web control" on the next page)
Power on again to check if the symptom persists.
Summary of Contents for XT32M2X
