-34-
4.2
Settings
(continued on the next page)
1. Reset All Settings
By clicking the "Reset All Settings" button on the top-right corner,
all configurable parameters in Settings and Azimuth FOV will be
reset to factory defaults.
The default values are shown in Section 4.2 and Section 4.3.1.
2. Control IP
VLAN Tagging can be used when the receiving host also supports
VLAN function.
· Check the VLAN checkbox and input a VLAN ID (1~4094)
· Set the VLAN ID of the receiving host to be the same
3. Destination IP
Range: except for 0.0.0.0, 127.0.0.1, and the LiDAR's IP
Mode
Destination IP
Broadcast (default)
255.255.255.255
Multicast
239.0.0.0~239.255.255.255
Unicast
Same as the PC's IP address
4. LiDAR Functions
Spin Rate
600 rpm / 1200 rpm
Return Mode
Last / Strongest / Dual Return
(continued on the next page)
