-47-
■ Fire Time Correction
After opening a .PCAP file, import the fire time correction file of this LiDAR model into PandarView
(File -- Import FireTime File).
Afterwards, click on
to finetune point cloud display using the fire time correction file.
Click on
again to cancel the finetuning effects.
■ Channel Selection
Click on
to open the Channel Selection box.
· Check/Uncheck the boxes on the left to show/hide each channel. By default,
the point cloud data from all channels are shown.
· Check/Uncheck the "Enable/Disable all" option at the bottom of the table to
show/hide all channels.
· When multiple channels are selected by holding the Shift or Ctrl key,
check/uncheck the "Enable/Disable selected" option to show/hide multiple
channels.
Click on
again to close the Channel Selection box.