Hesai Pandar128E3X User Manual Download Page 123 | Manualshive

Page: 123 / 124

background image

-

121

-

Appendix VI

Support and Contact

■ Technical Support

If your question is not addressed in this manual, please contact us at:

[email protected]

www.hesaitech.com

https://github.com/HesaiTechnology

NOTE Please leave your questions under the corresponding GitHub projects.

■ Legal Notice

Copyright 2021 by Hesai Technology. All rights reserved. Use or reproduction of this manual in parts or its entirety without the authorization of
Hesai is prohibited.

Hesai Technology makes no representations or warranties, either expressed or implied, with respect to the contents hereof and specifically
disclaims any warranties, merchantability, or fitness for any particular purpose. Further, Hesai Technology reserves the right to revise this
publication and to make changes from time to time in the contents hereof without obligation to notify any person of such revision or changes.

HESAI and HESAI logo are registered trademarks of Hesai Technology. All other trademarks, service marks, and company names in this manual
or on Hesai's official website are properties of their respective owners.

The software included in this product contains copyright that is registered under Hesai Technology. Any third party is not permitted, except as

expressly permitted by licensor or expressly required by applicable law, to decompile, reverse engineer, disassemble, modify, rent, lease, loan,

distribute, sublicense, create derivative works based on the whole or any part of the software.

«
...
121
122
123
124
»

Summary of Contents for Pandar128E3X





























































































































Reviews:

No comments

Related manuals for Pandar128E3X

Brand: MicRadar Pages: 13

Brand: COBHAM Pages: 72

Brand: Yaesu Pages: 3

Brand: KAM Pages: 6

Brand: Whistler Pages: 5

Brand: MAJORITY Pages: 24

Brand: Midland Pages: 16

Brand: Midland Pages: 19

Brand: PRESIDENT Pages: 8

Brand: International Receiver Company Pages: 12

Brand: Sony Pages: 2

Brand: Sony Pages: 19

Brand: Sony Pages: 20

Brand: Sony Pages: 24

Brand: Sony Pages: 24

Brand: Sony Pages: 26

Brand: Campbell Pages: 62

Brand: Radioddity Pages: 209

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands