background image

pg.3

Warranty

All OZBLOK products are guaranteed to be free of defects in materials and workmanship for one year from 

the date of shipment.

This does not apply to any product showing signs of misuse, overloading, alteration, improper maintenance 

or negligence. Normal wear and tear of moving parts including brake discs, wire rope, and other wear 

components are excluded from this warranty. This warranty does not cover any costs involving removal of 

this product, lost time, or any other incidental or consequential damages or costs resulting from the claimed 

defects. 

If any of our products fail during the first year of operating due to defective materials or workmanship, it will 

be repaired or replaced at the discretion of OZBLOK. The product will then be returned to the customer free 

of charge. If no defect is found, the customer will be responsible for return shipping costs.

Upon repair, the product will be covered by the warranty for the remainder of the original warranty period. 

OZBLOK will not be held liable for injuries to persons or property, death, incidental, consequential, or 

contingent damages, whether negligent or deliberate, arising from the use of the product. It is the sole 

responsibility of the owner to install and operate the product properly and safely.

This is OZBLOK’s only written warranty. This warranty is in lieu of all other warranties implied by law such 

as merchantability and fitness. The sale of OZBLOK products under any other warranty or guarantee, 

expressed or implied, is not authorized.

Note: OZBLOK has the right to alter the design or discontinue the production of any product without prior 

notice.

Warranty Policy

Any product for which there is a warranty claim must be returned prepaid to an authorized OZBLOK 

warranty depot along with proof of purchase. 

For more information please contact:

Hoisting Equipment

Specialists Pty Ltd

31 Mangrove Lane

Taren Point

NSW 2229 Australia

Phone: 1300 798 464

Fax: 1300 309 041

www.hesnsw.com.au

www.ozblok.com.au

Summary of Contents for OzBlok OBW0545

















Reviews: