Herz pelletfire 20/20, Operating Instructions Manual, Page: 68 / 100

9 Menu navigation and adjustment values
68
9.14.7 Mail Server settings
Navigation:
Screen:
By pressing the button:
Mail Server the mail server address can be entered (=outgoing mail server)
Mail address the boiler
’s E-mail address can be entered
Password the password can be entered
SSL,TLS,…
the encoding can be chosen (no, SSL, TLS)
Port Setting up the TCP port number.
Note:
To send mail at the adjusted values (error, warning, information according to capture 10), the boiler has to
have a valid E-mail address. After the successful creation of an E-mail address you can set up the
exemplified values shown in the figure.
Look up the data of the mail server and the port number at your provider (for example GMX). After
successful configuration of the mail server settings the boiler will send E-mail with the set up values.
9.14.8 E-Mail status report
Navigation:
Screen:
By pressing the button:
number of times the quantity of times (maximum 5) can be set up
Time 1-5 individual sending times (error, warning, information) can be set up.