Herz pelletfire 20/20, Operating Instructions Manual

Page: 40 / 100

9 Menu navigation and adjustment values
40
Term Description Unit
Additional input
Indicates the state of the additional input.
▪
If the indicator lamp lights up, the additional input is active (there is an
error)
At the additional input, the message of an external unit (CO detector,
extinguishing water tank, system pressure monitoring, etc.) can be
detected, for example.
-
Door open
Indicates the input of the door. If the indicator lamp lights up, the door is
open
-
Menu
„Operating hours“
Operating hours
Pellet operation
1
2 3
Nominal load Displays system operation hours during nominal load phase (95 -100%) h
Modulation Displays system operation hours during modulation phase (94-31%) h
Part load Displays system operation hours during part load phase (<30%) h
Scorch- /burn out
Displays system operation hours during burning, born down and burnout
phase
h
Boiler run time
Displays the boiler run time (=sum of nominal load-, modulation-, part
load- and burn down- /burn out phase)
h
Total
Display of the total operation hours of the system
(incl. Ready)
h
Operating hours
Log wood operation
1
2
3
Nominal load Displays system operation hours during nominal load phase (95 -100%) h
Modulation Displays system operation hours during modulation phase (94-31%) h
Part load Displays system operation hours during part load phase (<30%) h
Scorch- /burn out
Displays system operation hours during burning, born down and burnout
phase
h
Boiler run time
Displays the boiler run time (=sum of nominal load-, modulation-, part
load- and burn down- /burn out phase)
h
Total
Display of the total operation hours of the system
(incl. Ready)
h
Operating hours
1 2
3
Operating hours until
inspection
Display Operating hours until inspection. Can be reset by entering a code.
Information message "Maintenance" (error No.38) appears after the set
inspection interval has been exceeded (standard: 1000 operating hours).
h
Maintenance interval
date:
Display date until to next maintenance.
Information message "Service" (Error No. 39 ) appears after exceeding
the set maintenance interval (standard: 3000 operating hours) or after
exceeding the annual interval.
-
Maintenance interval
remaining - operating
hours:
Display remaining-operating hours until to next maintenance h
Interval ash tray Display of the interval (emptying) of the ash tray h
Interval ash tray actual Display of the actual interval since the last emptying of the ash tray h