Herz firematic PELLET 120, Operating Instructions Manual

Page: 75 / 94

Maintenance schedule 11
75
11 MAINTENANCE SCHEDULE
(Some points have also been prescribed in accordance with TGPF 118 H!)
For safety reasons, maintenance must only be carried out with the main switch
turned off. However first of all, the system must be switched off by means of the
On/Off button and you must wait for the burnout phase.If you have to climb into the
storage tank or bunker, always make sure that there is a second person available
to supervise you.
Potential carbon monoxide enrichment may put your life in danger.
11.1 Weekly Inspection
Item Procedure
Total system
Check the whole boiler system (1)
including the fuel storage room (2)
visually for damages and wear. Repair
discovered faults immediately.
Extinguisher
container
Check extinguisher container filling level
and refill if necessary. If re-filling occurs
frequently, contact your contracting party.
11.2 Monthly inspection
Item Procedure
Pivoting und step
grate
Burning chamber
firematic 120-201
Demount cover and open burning
chamber
door (1).Check burning
chamber stones and walls visually for
damages and wear and conduct cleaning
with scraper and broom, afterwards
remove ash off step grate and hoover.
Check and clean burning chamber vents.
Pivoting and step
grate
Burning chamber
firematic 120-201
Check burning chamber visually for
damages and wear and conduct cleaning
with scraper and broom (2).
Check and clean burning chamber vents
(3).
Check pivoting and step grate (4) visually
for damages and wear.
2
3
firematic120-301
4
1
firematic120-201
1
2