Herz firematic CONDENSATION 30, Operating Instructions Manual

Page: 9 / 92

System 5
9
5 SYSTEM
5.1 System overview
In figure 5.1 an example of a system with the following three components is shown:
(1) Storage room filling system
(2) Boiler
(3) Room discharge system
In the pictured case a rigid pellets-screw system with modular agitator system (3) is shown. The filling of the
fuel storage room is carried out with vertical filling screws (1). Please consider that the installed room
discharge and storage room filling system can be different to the displayed system. If all room discharge and
storage room filling systems of HERZ would be presented, the scope of this guide would be exceeded
considerably. More information can be provided by the company HERZ.
When the storage room will be filled, the agitator must turn.
The agitator with spring discharge or articulated arm or conveyor screw assists in emptying the storage
space. A complete emptying of the storage space is not guaranteed by the withdrawal system. The degree of
emptying depends on many factors that are not within the sphere of influence of Herz.
figure 5. 1: System overview (example with agitator - symbolic representation)
In the following chapter the boiler (2) and the room discharge system (3) and its individual components are
described and displayed.
1 2
3